Stopping Distance CalculatorReaction distance plus braking distance, on any road surface

Enter your speed, how quickly you react and the road conditions. The calculator shows how far you travel before you touch the brake, how far the car takes to stop, and the total distance in feet, meters and car lengths.

Free, no sign-upDry, wet, snow & icemph or km/hBy ReviewsWhiz Editorial Team

Your situation

mph
sec
1.5 s is a typical alert driver.
%
Negative for downhill.

How to use the Stopping Distance Calculator

  1. Choose your units and enter your speed.
  2. Set your reaction time. About 1.5 seconds is typical for an alert driver who has to spot a hazard and move their foot to the brake. Tired or distracted drivers can take 2 to 3 seconds or more.
  3. Pick the road surface. Grip drops sharply on wet roads, snow and ice.
  4. Add a slope if you are going downhill (negative) or uphill (positive).
  5. Read the total, then compare speeds in the table.
Quick answer: at 60 mph on a dry road, an alert driver needs about 304 feet to stop: about 132 feet while reacting and 172 feet of braking. On a wet road that rises to around 433 feet.

Stopping distance = reaction distance + braking distance

Reaction distance is how far you travel between seeing a hazard and pressing the brake. At 60 mph you cover 88 feet every second, so a 1.5-second reaction already uses 132 feet. Reaction distance grows in step with speed: twice as fast means twice as far.

Braking distance is how far the car travels once the brakes are applied. It depends on the square of your speed, so doubling your speed makes braking distance about four times longer. That is why a small increase in speed has a big effect on how far you need to stop.

Typical stopping distances on a dry road

SpeedReaction (1.5 s)BrakingTotal
20 mph44 ft19 ft63 ft
30 mph66 ft43 ft109 ft
40 mph88 ft76 ft164 ft
50 mph110 ft119 ft229 ft
60 mph132 ft172 ft304 ft
70 mph154 ft234 ft388 ft

These figures use a friction coefficient of 0.7, typical of a good car with decent tires on dry asphalt. A modern car with excellent tires can stop shorter in a test, but real-world stops are often longer because of worn tires, heavy loads or uneven surfaces.

What makes stopping distances longer

  • Wet roads: braking distance can nearly double. Standing water can cause hydroplaning, where the tires lose contact with the road.
  • Snow and ice: braking distances can be three to ten times longer than on dry roads.
  • Worn tires: tread depth matters most in the wet. Tires near the 2/32″ legal minimum stop much longer on wet roads.
  • Distraction and fatigue: looking at a phone for two seconds at 60 mph means traveling 176 feet without watching the road.
  • Heavy loads and towing: more weight takes more distance to stop.
  • Downhill slopes: gravity works against your brakes.
  • Brake condition: worn pads, old brake fluid or overheated brakes all reduce stopping power.

How to keep a safe distance

Since you cannot change physics, the best defense is space. Use the three-second rule: when the car ahead passes a fixed point, count “one thousand one, one thousand two, one thousand three.” If you reach the point before you finish, you are too close. Double it to six seconds or more in rain, at night, when towing, or behind large trucks, and much more on snow or ice.

Driver-assist features such as automatic emergency braking can react faster than a person, but they are not a substitute for attention and safe following distance. They also cannot overcome low grip on wet or icy roads.

The formula behind it

Reaction distance = Speed (m/s) × Reaction time
Braking distance = Speed² ÷ (2 × 9.81 × (μ + Slope))
Total = Reaction distance + Braking distance
Friction μ ≈ 0.7 dry · 0.4 wet · 0.2 snow · 0.1 ice

Slope is entered as a decimal (5% = 0.05), negative for downhill. Speed in m/s = mph × 0.447 or km/h ÷ 3.6. These are physics-based estimates; real stopping distances vary with the vehicle, tires, brakes and road.

Stopping distance facts

4×
Braking distance when you double your speed.
88 ft/s
How far you travel each second at 60 mph.
1.5 sec
A typical reaction time for an alert driver.
About 2×
How much longer braking can take on a wet road.
Up to 10×
How much longer braking can take on ice than on dry pavement.
3 seconds
The minimum following gap in good conditions.

Frequently asked questions

What is the stopping distance at 60 mph?
On a dry road with a 1.5-second reaction time, about 300 feet (around 92 meters). That is roughly the length of a football field. On a wet road it is closer to 430 feet.
What is the difference between braking distance and stopping distance?
Braking distance is only the distance the car travels after the brakes are applied. Stopping distance adds the reaction distance you travel before you start braking.
Why does braking distance increase so much with speed?
The energy the brakes have to remove grows with the square of speed. Going from 30 to 60 mph doubles your speed but quadruples your braking distance.
Does ABS shorten stopping distance?
On most dry and wet roads, ABS helps you keep steering control and often stops slightly shorter. On loose gravel or deep snow it can sometimes stop longer. Its main job is control, not distance.
How much further does it take to stop when towing?
It depends on the trailer’s weight and brakes, but stopping distances can be 20% to 50% longer or more. Leave much more space when towing.
What reaction time should I use?
About 1.5 seconds for an alert driver who is not expecting a hazard. Use 2 to 3 seconds for a tired or distracted driver.

Related tools and guides

Learn how your car keeps you safe

Read our guides to safety systems and driver-assist features.

Read the guides →

Results are physics-based estimates for general information only. Real stopping distances depend on your vehicle, tires, brakes, load, road and the driver. Always drive at a speed that lets you stop safely.